Drying furnace
A furnace equipment of drying for the water and the several solvents is provided. There are heating systems such as the hot air circulation (heat source is the steam, gas, electricity) or radiation (infrared) heating by electric heater. It can be chosen according to the specifications, shape, and use of products to be treated. We can provide the several convey systems from a mesh belt conveyor for drying the granular product to a widely used chain conveyor.
| 「Continuous」 | ||
|---|---|---|
| Furnace type | a continuous mesh belt continuous |  |
| Temperature | 100℃ | |
| Dimensions | 2700W×47360L×250H | |
| Heat source | steam (hot air circulation) | |
| 「Batch」 | ||
|---|---|---|
| Furnace type | multistage car bottom furnace (hot air circulation) |  |
| Temperature | 300℃ | |
| Dimensions | 1400W×2400L×1400H | |
| Heat source | hot air circulation with electric heating | |
Refining furnace
For heat treatment furnace of fine powder product, the steel belt transport system was adopted to prevent the fall of powder. The infrared radiation heating system with the electric heater are used.
| Furnace type | refining furnace (continuous steel belt type) |  |
|---|---|---|
| Temperature | 800℃ | |
| Dimensions | 600W×8450L×75H | |
| Heat source | electric (radiation) |
Firing furnace
This is the batch furnaces for thermal treatment for ceramic and refractory materials. We provide the energy saving, uniformity of the spatial temperature distribution in furnace, and the protocol control of the temperature.
| Furnace type | car bottom furnace |  |
|---|---|---|
| Temperature | 800℃(batch) | |
| Dimensions | 1700W×3300L×1600H | |
| Heat source | electric (radiation) |
Mold preheating furnace
This is a furnace facility for the preheating of the mold and there is a car bottom type and manual injection type. Heat source can be used electricity and gas. Hot air circulation system is adopted to maintain a uniform temperature in the furnace
| Furnace type | circulating hot air oven |  |
|---|---|---|
| Temperature | 500℃(batch) | |
| Dimensions | 1200W×1200L×600H | |
| Heat source | gas |
Compounding and weighting equipment
We can design and manufacture of the plant for injection, storage, extraction, weighting, mixing and supplying equipment for the preparation of various types of powder.
